THE ULTIMATE
Power on/off: push forward to open the battery cover, put two high-rate 18650 batteries in correct way into the device and finally close the battery cover. The device can be powered on or off by pressing the fire button 5 times. The battery levels of battery 1 and battery 2 are respectively displayed on the screen.
Note: 1. Please be careful not to use batteries with torn casing as it is a safety hazard. 2. Please make sure you are using high-rate 18650 batteries whose continuous discharge current should be above 25A. 3. Before using, please set the wattage within a proper range that the atomizer you installed can work with. Vaping: when the Eleaf iKonn 220 is powered on, long press the fire button to take a puff. Stealth on/off: press the fire button and “-” end of the adjustment button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see current setting. Adjustment button lock/unlock: keep pressing “+” end and “-” end of the adjustment button simultaneously for two seconds when the device is powered on, then the adjustment button will be locked and the screen will display “Key Lock”. In the same way, the adjustment button can be unlocked and the screen will display “Key Unlock”. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan. Switch display mode: keep pressing “+” end and “-” end simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation. Switch display interfaces: in power-on state, choose VW mode; keep holding “+” end and fire button till the current interface flashes; when it’s flashing, press “+”or “-” end to switch among different interfaces; finally press fire button once to confirm the interface you chose. Note: the interface can only be changed and selected under VW mode in power-on state. And when one interface is selected under VW mode, the interfaces of TC (Ni, Ti, SS, M1, M2, M3) modes will change accordingly and automatically.
1 Comment
There are some advices about changing the coils and filling the atomizer of Eleaf iKonn 220 with ELLO kit, I recommend that you empty any E-Liquid in the Ello tank before changing coils
To change the coil
The iKonn 220 with ELLO kit comes with 2 new HW coils. The first is the HW3 Triple-Cylinder 0.3ohm head and the second is the HW4 Quad-Cylinder 0.2ohm Head for better cloud production. This vape has a resistance range of 0.05-1.5 ohm (tc modes) and 0.1-3.5 ohm (vw mode).
The temperature range is from 100-315℃/200-600℉(TC modes) and the iKonn 220 runs off of dual 18650 batteries capable of outputting a maximum of 220 watts. So overall this is pretty impressive and can generate some decent vapor production. The Eleaf iKonn 220 and the ELLO atomizer are both made with durable quality materials. Eleaf has been in the vape business for a while and knows that the best materials need to be used to create quality products.
The Eleaf iKonn 220's design allows for easy cleaning, all parts of the tank can be detached. The atomizer base, the HW coil, the glass cylinder, the top cap and the mouthpiece. The tank has been built with a retractable top fill system – very practical design. The Eleaf iKonn 220 with higher output, max to 220w. Required dual replaceable batteries, provides me with a new vaping experience. It also can use as my cell phone charger, that's very convenience. It has a big screen that I can know about the batteries level at any time. Features preheat function and switchable interface, I can operation it easily.
|
iStick.orgwww.istick.org is a Eleaf iStick Vape online Store, which is Eleaf official Authorized dealer online store, promise all products are 100% original and you can enjoy a perfect customer service. Archives
April 2018
Tags
All
|